GE FC200755 PC21P3 Board for Logiq Ultrasound Systems

Our catalog entry for the GE pc21p3 board consolidates the on-file data for this GE ultrasound-system component — model reference, compatible platform, and category — to assist with part identification and ordering.

• Designed and catalogued as a pc21p3 board for GE ultrasound systems.
• Listed for use on GE Logiq 7 from BT06, Logiq S6 from BT08 consoles.
• Manufacturer part reference on file: FC200755.
• Catalogued as a GE service / replacement part suitable for preventive maintenance.
• Catalog category: Ultrasound u00bb Parts.

Catalog compatibility covers the following GE consoles: Logiq 7 from BT06, Logiq S6 from BT08. Confirm the host-system revision matches the part reference before placing the order.

Ultrasound consoles contain multiple printed circuit boards — main, beamformer, channel, video, I/O, power, and dedicated sub-system boards — each identified by its own part reference. Replacement boards must be ordered by the full part number printed on the PCB (or in the service manual), because cross-revision substitution can change pin-out, calibration, or firmware behavior.

• 1× GE FC200755 PC21P3 Board for Logiq Ultrasound Systems
• Part reference label

• Verify the part number and model fitment against your unit's documentation prior to purchase.
• Product images and descriptions are for reference; the appearance of the actual item may vary by production batch or revision.
• If you are unsure about compatibility, contact our support team with your system model and serial number.
• Sterilization and handling should follow your facility's protocols and the manufacturer's instructions.
• Where the part interacts with patient-contact or measurement-critical subsystems, validate the system against the manufacturer's service procedure before returning it to clinical use.
• Cross-check the on-unit part marking against the catalog part reference before installation.

SKU/Link Reference: GEFC200755PC21P3Board