Samsung BD-336-BF - Beamformer PCB for SA8000 - Samsung Medison

Our catalog entry for the Samsung beamformer pcb consolidates the on-file data for this Samsung ultrasound-system component — model reference, compatible platform, and category — to assist with part identification and ordering.

• Designed and catalogued as a beamformer pcb for Samsung ultrasound systems.
• Listed for use on Samsung SA8000 consoles.
• Manufacturer part reference on file: BD-336-BF.
• Catalogued as a Samsung service / replacement part suitable for preventive maintenance.
• Catalog category: Ultrasound u00bb Parts.

Use with the Samsung SA8000 as documented in our catalog. Cross-check the unit's serial-plate revision against the part number before ordering.

Beamforming is the signal-processing step that turns raw channel data from the probe into a focused scan line: it applies transmit and receive delays per channel to focus the acoustic beam at a chosen depth and steering angle. Beamformer boards therefore carry both high-speed digital logic (delays, summation, apodization) and per-channel analog paths. They are tightly coupled to the front-end and probe interface, so beamformer replacements must match the host platform's revision.

• 1× Samsung BD-336-BF - Beamformer PCB for SA8000 - Samsung Medison
• Part reference label

• Verify the part number and model fitment against your unit's documentation prior to purchase.
• Product images and descriptions are for reference; the appearance of the actual item may vary by production batch or revision.
• If you are unsure about compatibility, contact our support team with your system model and serial number.
• Sterilization and handling should follow your facility's protocols and the manufacturer's instructions.
• Installation should be performed by qualified service personnel following the original manufacturer's guidance.
• Cross-check the on-unit part marking against the catalog part reference before installation.

SKU/Link Reference: SamsungBD-336-BFBeamformerPCB