Siemens 5.0HDPL40 for Sonoline Elegra

The Siemens 5.0hdpl40 for sonoline elegra is a Siemens ultrasound probe carried in our catalog. Use the technical specifications and compatibility notes below to verify that the probe is approved for your console revision and intended clinical use.

• Designed and catalogued as a 5.0hdpl40 for sonoline elegra for Siemens ultrasound systems.
• Listed for use on Siemens Sonoline Elegra consoles.
• Manufacturer part reference on file: 5.0HDPL40.
• Catalog-listed frequency band: 5.0 Mhz.
• Listed under the Siemens probe / transducer product line.

This part is matched to the Siemens Sonoline Elegra in our catalog. Confirm the host console's model designation against the part reference before purchasing.

• 1× Siemens 5.0HDPL40 for Sonoline Elegra
• Product identification / part reference label

• Verify the part number and model fitment against your unit's documentation prior to purchase.
• Product images and descriptions are for reference; the appearance of the actual item may vary by production batch or revision.
• If you are unsure about compatibility, contact our support team with your system model and serial number.
• Validate probe recognition and image quality on the host console before clinical use.
• Probe reprocessing (cleaning, disinfection, inspection) should follow the manufacturer's guide between clinical uses.
• Mechanical damage to the lens, cable strain relief, or connector pins is the most common cause of probe replacement in the field.

SKU/Link Reference: Siemens50HDPL40