Aloka EP4015 - Probe Selection Board

Listed here is the Aloka ep4015, a Aloka ultrasound-system component kept in our parts catalog. Use the technical specifications, compatibility, and ordering reference below to confirm fitment before procurement.

• Designed and catalogued as a ep4015 for Aloka ultrasound systems.
• Catalogued as a Aloka service / replacement part suitable for preventive maintenance.
• Catalog category: Ultrasound » Parts.

Catalog compatibility covers Aloka ultrasound consoles. Confirm the host-system model and revision against the part reference prior to procurement.

Ultrasound probes integrate the piezoelectric element array, the acoustic lens, the connector, and (in many designs) a built-in identification chip that the console reads on connect. Cleaning, disinfection, and inspection between uses follow the manufacturer's reprocessing guide and are part of routine clinical-engineering workflow; mechanical damage to the lens, cable strain relief, or connector pins is the most common cause of probe replacement in the field.

• 1× Aloka EP4015 - Probe Selection Board
• Product identification / part reference label

• Verify the part number and model fitment against your unit's documentation prior to purchase.
• Product images and descriptions are for reference; the appearance of the actual item may vary by production batch or revision.
• If you are unsure about compatibility, contact our support team with your system model and serial number.
• Cross-check the on-unit part marking against the catalog part reference before installation.
• Sterilization and handling should follow your facility's protocols and the manufacturer's instructions.
• Where the part interacts with patient-contact or measurement-critical subsystems, validate the system against the manufacturer's service procedure before returning it to clinical use.

SKU/Link Reference: AlokaEP4015ProbeSelectorBoard