Aloka EP9155 - CPU Board for F37

Our catalog entry for the Aloka cpu board consolidates the on-file data for this Aloka ultrasound-system component — model reference, compatible platform, and category — to assist with part identification and ordering.

• Designed and catalogued as a cpu board for Aloka ultrasound systems.
• Listed for use on Aloka F37 consoles.
• Manufacturer part reference on file: EP9155.
• Catalogued as a Aloka service / replacement part suitable for preventive maintenance.
• Catalog category: Ultrasound u00bb Parts.

Use with the Aloka F37 as documented in our catalog. Cross-check the unit's serial-plate revision against the part number before ordering.

Replacing a CPU board in an ultrasound console usually means re-installing the manufacturer-approved system image (OS, drivers, application software) and recalibrating the imaging sub-systems. The board itself should be ordered by full part reference for the host console generation; cross-generation substitution is not supported.

• 1× Aloka EP9155 - CPU Board for F37
• Product identification / part reference label

• Verify the part number and model fitment against your unit's documentation prior to purchase.
• Product images and descriptions are for reference; the appearance of the actual item may vary by production batch or revision.
• If you are unsure about compatibility, contact our support team with your system model and serial number.
• Cross-check the on-unit part marking against the catalog part reference before installation.
• Installation should be performed by qualified service personnel following the original manufacturer's guidance.
• Where the part interacts with patient-contact or measurement-critical subsystems, validate the system against the manufacturer's service procedure before returning it to clinical use.

SKU/Link Reference: AlokaEP9155CPUBoard