Aloka UST-5410 for SSD-5000 Ver. 5.1 and above, SSD-5500 Ver. 6.1 and above, Alpha 5

Catalog record: the Aloka linear high frequency transducer for breast and superficial imaging. The information below — including the operating-frequency band documented in the catalog — is the source-of-truth used by our team when confirming probe-to-console compatibility.

• Manufacturer-defined function: linear high frequency transducer for breast and superficial imaging (for Aloka ultrasound platforms).
• Compatible with Aloka SSD-5000 Ver. 5.1 and above, SSD-5500 Ver. 6.1 and above, Alpha 5.
• Catalog part reference: UST-5410.
• Operating frequency band (per catalog record): 5.0/13.0 Mhz.
• Belongs to the Aloka transducer family.

This product is listed for use with the following Aloka ultrasound systems: SSD-5000 Ver. 5.1 and above, SSD-5500 Ver. 6.1 and above, Alpha 5. Verify your specific system model and revision against the part reference before ordering to confirm fit.

A transducer is the only part of the ultrasound chain that touches the patient, so it has a direct influence on image quality and on clinical workflow. Probe selection is driven by clinical application (abdominal, vascular, cardiac, OB/GYN, MSK, intraoperative, etc.), by patient population (adult vs. pediatric, body habitus), and by the imaging modes required (B-mode, color Doppler, spectral Doppler, elastography). Replacement probes should be ordered against the original manufacturer's compatibility matrix rather than against generic footprint or frequency claims.

• Aloka UST-5410 for SSD-5000 Ver. 5.1 and above, SSD-5500 Ver. 6.1 and above, Alpha 5
• Manufacturer part reference label

• Verify the part number and model fitment against your unit's documentation prior to purchase.
• Product images and descriptions are for reference; the appearance of the actual item may vary by production batch or revision.
• If you are unsure about compatibility, contact our support team with your system model and serial number.
• Mechanical damage to the lens, cable strain relief, or connector pins is the most common cause of probe replacement in the field.
• Confirm connector type, frequency range, and intended clinical application before ordering.

SKU/Link Reference: AlokaUST-5410