Samsung BD-345C-CW V20 Non-CW Board | Medison Replacement

Listed here is the Samsung v20 non-cw board, a Samsung ultrasound-system component kept in our parts catalog. Use the technical specifications, compatibility, and ordering reference below to confirm fitment before procurement.

• Designed and catalogued as a v20 non-cw board for Samsung ultrasound systems.
• Listed for use on Samsung SAX8 consoles.
• Manufacturer part reference on file: BD-345C-CW.
• Catalogued as a Samsung service / replacement part suitable for preventive maintenance.
• Catalog category: Ultrasound u00bb Parts.

Use with the Samsung SAX8 as documented in our catalog. Cross-check the unit's serial-plate revision against the part number before ordering.

Channel electronics carry the high-voltage transmit pulsers and the low-noise receive pre-amplifiers that interface directly to the probe elements. They are calibrated to a specific host platform and probe family, so channel-board replacement should follow the manufacturer's calibration procedure; cross-platform reuse without recalibration is not supported.

• 1× Samsung BD-345C-CW V20 Non-CW Board | Medison Replacement
• Product identification / part reference label

• Verify the part number and model fitment against your unit's documentation prior to purchase.
• Product images and descriptions are for reference; the appearance of the actual item may vary by production batch or revision.
• If you are unsure about compatibility, contact our support team with your system model and serial number.
• Cross-check the on-unit part marking against the catalog part reference before installation.
• Sterilization and handling should follow your facility's protocols and the manufacturer's instructions.
• Where the part interacts with patient-contact or measurement-critical subsystems, validate the system against the manufacturer's service procedure before returning it to clinical use.

SKU/Link Reference: SamsungBD-345C-CWV20Non-CWBoard