Siemens 3.5SI15 Convex Ultrasound Probe

The Siemens circular connector, 15mm, 98818, 572562 is a Siemens ultrasound probe carried in our catalog. Use the technical specifications and compatibility notes below to verify that the probe is approved for your console revision and intended clinical use.

Key Features

• Designed and catalogued as a circular connector, 15mm, 98818, 572562 for Siemens ultrasound systems.
• Listed for use on Siemens Sonoline SI-200, Sonoline SI-250, Sonoline ScL consoles.
• Manufacturer part reference on file: 3.5-15.
• Listed under the Siemens probe / transducer product line.
• Catalog category: Convex ultrasound.

Specifications

Platform Compatibility

Listed compatible platforms include: Siemens — Sonoline SI-200, Sonoline SI-250, Sonoline ScL. Each candidate console should be verified against the part reference before ordering.

Component Overview

Ultrasound probes integrate the piezoelectric element array, the acoustic lens, the connector, and (in many designs) a built-in identification chip that the console reads on connect. Cleaning, disinfection, and inspection between uses follow the manufacturer's reprocessing guide and are part of routine clinical-engineering workflow; mechanical damage to the lens, cable strain relief, or connector pins is the most common cause of probe replacement in the field.

What's Included

• 1× Siemens 3.5SI15 Convex Ultrasound Probe
• Product identification / part reference label

Important Notes

• Verify the part number and model fitment against your unit's documentation prior to purchase.
• Product images and descriptions are for reference; the appearance of the actual item may vary by production batch or revision.
• If you are unsure about compatibility, contact our support team with your system model and serial number.
• Validate probe recognition and image quality on the host console before clinical use.
• Probe reprocessing (cleaning, disinfection, inspection) should follow the manufacturer's guide between clinical uses.
• Mechanical damage to the lens, cable strain relief, or connector pins is the most common cause of probe replacement in the field.

SKU/Link Reference: Siemens35SI15