Consent D-Day Certificate 2008 – FIL/Flet Connection Between Main Board and Keyboard

This specialized connection component provides a reliable FIL/Flet ribbon connection between the main board (motherboard) and the intermediate board of the keyboard. Designed for use with Sonosite ultrasound units, this part ensures stable data and signal transfer, improving key-input response and overall system reliability.

Key Features

- High-precision Flet/FIL ribbon connection between mainboard and keyboard interface - Compact and flexible flat-cable design for easy installation in limited spaces - Stable signal integrity with low interference - Quick swap-out convenience for maintenance and replacement - Suitable for durable performance in Sonosite ultrasound systems

Technical Specifications & Compatibility

Installation Instructions

1. Completely power off the device and disconnect the battery/AC source.
2. Open the casing as per instructions to access the mainboard and keyboard interface.
3. If an old ribbon cable is present, gently lift the locking clip and pull it out slowly.
4. Insert the new FIL/Flet cable straight into the connector and lower the locking clip to ensure a firm fit.
5. Follow the routing guide to avoid cable bending/pulling, close the cover, and power on.

Maintenance Tips

- Use ESD protection (anti-static strap) when inserting/removing connectors - Protect the cable from excessive bending or pressure; avoid sharp 90° folds - If dust or dirt accumulates, clean with non-abrasive, dry air

Note

Actual length/pin count/connector keying may vary depending on the model and hardware revision. Please verify by matching your device's service manual or parts list before ordering. Contact our technical support if needed.